How to make your e-cigarettes last longer?

E-cigarettes can often fail due to improper operation during normal use and maintenance. Therefore, whether you are a new user or an e-cigarette enthusiast, it's essential to consider the following aspects when using and maintaining your device.

1. Placement

E-cigarettes should be placed according to principles. When there is e-liquid in the atomizer, the mouthpiece should be placed facing upwards. However, it's best not to place it upside down to avoid exposing the remaining e-liquid in the atomizer.

2. Battery Maintenance

Battery maintenance is crucial because the battery is the primary component of an e-cigarette. Try to charge the battery once it is depleted. Charge it once fully without interrupting the process.

After the battery is fully charged, remove it within half an hour. If the e-cigarette is not in use for an extended period, please turn off the power. Generally, e-cigarettes can be turned on or off by pressing the button five times within two seconds.

When the e-cigarette is not in use, remove the battery and place it in a VC4S charger. Use the storage mode to charge and discharge the battery to 3.7V for low-temperature dry storage.

3. Atomizer

The core of the atomizer is the coil, consisting of resistance wire, wicking material, and some accessories. The most common issue with the atomizer is a burnt taste, which occurs when the coil heats up and burns the wick. Therefore, during use, pay attention to the remaining e-liquid level and avoid letting it run dry. Adjustable voltage mods should be set to an appropriate voltage.

Avoid using high voltage. A satisfactory flavor is enough. If you prefer dense vapor, be mindful of the e-liquid level. Generally, when the remaining e-liquid is above 2/3, using a voltage of 5-6V is less likely to cause burning. As the e-liquid decreases, gradually reduce the voltage to avoid a burnt taste.

4. Handling Atomizer Leaks and E-liquid Ingress

Traditional atomizers generally have an air intake hole at the bottom for airflow. Over time, a small amount of e-liquid may accumulate (but it won't leak onto the device, and you won't feel it outside), which is normal.

It is recommended to separate the battery from the atomizer every time you refill e-liquid and wipe them clean with a tissue. Since e-liquid is usually refilled daily, it's best to wipe it clean every day.

There are two main situations where the atomizer might have e-liquid:

(1) If there is e-liquid where the mouthpiece contacts your lips, it may be caused by misfilling the e-liquid. Wipe it clean with a tissue.

(2) If there is e-liquid in the vapor but none in the mouthpiece, and the vapor outlet has e-liquid, wipe the coil clean. Twist a tissue into a thin strip and insert it into the vapor outlet to absorb the e-liquid.

DarkHorse, as an expert in e-cigarette research for many years, can provide you with some advice to a certain extent. If you want to learn more about e-cigarettes after reading the above content, feel free to contact us for a comprehensive solution.

DarkHorse is an experienced e-cigarette manufacturer, and our mission is to prioritize our customers' needs. We have a professional production team and a strict quality control system to fully manage our product quality. Our products are sold worldwide and have received praise and trust from users. If you are interested in our e-cigarettes, please contact us immediately!